Section 01-12: Instrument Panel and Console
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Power Point

 CAUTION: Do not use the cigar lighter socket and retainer (15055) in place of power point.

Removal

  1. Remove instrument panel ash receptacle (04810).

  1. NOTE: Do not pry on plastic bezel to remove.

    Reach through ash receptacle opening and squeeze four tabs on back of bezel.

  1. Pull assembly from instrument panel (04320) and unplug wiring connector.

Installation

  1. Follow removal procedures in reverse order.