Door Glass Run Retainer, Front

Removal

1. Remove the front door window glass. Refer to the procedure in this section.

2. Pull the front door glass top run (21596) out of the front door window opening and front door glass run latch side retainer.

   
   
   Front Door Window Assembly
   
   
   
   
   
   

   Item	Part Number	Description
   1	21402	Front Door Vent Window
   2	21448	Weatherstrip, Front Door Vent Window
   3	21596	Front Door Glass Top Run
   4	21410	Front Door Window Glass
   5	21458	Front Door Glass Channel and Retainer
   6	351909-S	Screw, Front Door Vent Window Frame-to-Front Door Vent Window Division Bar
   7	21452	Front Door Belt Line Outside Weatherstrip
   8	21456	Front Door Belt Line Inside Weatherstrip
   9	22A00	Front Door Glass Run Latch Side Retainer
   10	23240	Window Regulator Arm Roller
   11	23200	Front Door Window Regulator
   12	23342	Window Regulator Handle
   13	23370	Window Regulator Handle Plate
   14	23227	Window Regulator Handle Seal
   15	22926	Pivot Spring, Front Door Vent Window
   16	22963	Pivot Washer, Front Door Vent Window
   17	22916	Front Door Vent Window Handle
   18	21608	Frame, Front Door Vent Window
   19	21408	Weatherstrip Retainer, Front Door Vent Window
   20	22296	Division Bar, Front Door Vent Window
   21	23208	Front Door Power Window Regulator Minus Motor
   22	385189-S	Rivet
   23	23394	Window Regulator Electric Drive
   24	234A24	Window Regulator Drive Gear Kit

3. Remove the front door glass run latch side retainer-to-front door inner panel screw.

4. Twist and guide the front door glass run latch side retainer up and out of the front door.

Installation

1. Follow the removal procedures in reverse.