Section 01-11: Glass, Frames and Mechanisms
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Window Regulator Control Switch, Tailgate, Tailgate-Mounted

Removal

  1. Lower the tailgate and remove interior access cover panel.

  1. Close the tailgate and raise back window glass (42006). If back window glass cannot be raised, remove back window glass as outlined in Window, Tailgate in the Removal and Installation portion of this section.

  1. Disconnect the electrical connector from the window regulator control switch.

  1. Detach the window regulator control switch from lock cylinder by removing clip and remove from tailgate.

 

Installation

  1. Follow removal procedures in reverse order.