Section 01-10: Seats and Tracks | 1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual |
Removal
NOTE: On the F-350 Crew Cab, make sure that springs (one each side) rest against the bottom of the seat back and are hooked over the pawls on each end of the latch.
Remove latch-to-seat back attaching bolts or screws.
Installation
Follow removal procedures in reverse order.
On F-350 Crew Cab, tighten upper latch assembly bolt to 25-43 Nm (18-32 lb-ft) and cushion-to-latch assembly to 24-36 Nm (18-27 lb-ft).
On Bronco, tighten latch bolts to 17-24 Nm (12-18 lb-ft) and screws to 18-27 Nm (13-20 lb-ft).
Item | Part Number | Description |
---|---|---|
1 | 63160 | Rear Seat Cushion Frame |
2 | 61382 | Rear Seat Back Release Latch |
3 | 38887-S2 | Bolt |
4 | 613A38 | Rear Seat Back Frame |
5 | 391132-S2 | Bolt |
6 | N801527-S2 | Washer |
A | — | Tighten to 25-43 Nm (18-32 Lb-Ft) |
B | — | Tighten to 24-36 Nm (18-27 Lb-Ft) |