Section 01-10: Seats and Tracks
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Switch, Seat Control—Seat Back

Removal

  1. Open hood (16612) and disconnect battery ground cable (14301).

  1. Open front door (20124) and remove front seat cushion frame and spring (63100) assembly. Refer to Seat Assembly, 40/20/40 Bench in the Removal and Installation portion of this section.

  1. Remove seat regulator control processor sensor (14C718).

  1. Remove screws attaching seat back control switch to front seat cushion frame and spring.

  1. Disconnect front seat back pad adjusting hose (65528) from seat back control switch.

  1. Disconnect switch connector from wire harness.

Installation

  1. Follow removal procedures in reverse order.