Seat, Rear, Side-Mounted Folding, F-150, F-250, F-350 SuperCab

Removal

1. Remove seat bracket-to-floor screw and washer assemblies.

2. Remove the seat assembly.

3. Remove bumper screws to retainer.

4. Remove the bumper.

5. Remove retainer screws to trim panel.

6. Remove the retainer assembly.

Installation

1. Follow removal procedures in reverse order.

2. Tighten screw and washer assemblies to 30-40 Nm (22-30 lb-ft).

   
   
   Rear Side-Mounted Seats, SuperCab
   
   
   
   
   
   

   Item	Part Number	Description
   1	60026	Seat Assembly Rear Trim
   2	N621942-S411	Nut (2 Req'd Each Side)
   3	N801366-S411	Stud (2 Req'd Each Side)
   4	52018	Panel
   5	600A84	Rear Seat Cushion Retainer
   6	624A16	Rear Seat Back Bumper
   7	382413-S58	Screw
   8	613A70	Rear Seat Back Bumper Plate
   A	—	Tighten to 30-40 Nm (22-30 Lb-Ft)