Section 01-02: Body Panels, Front End
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Cowl Top Panel Seal

 

Removal

  1. Open hood (16612).

  1. Remove seven screws securing cowl top panel seal (02824) to cowl top vent panel (022A68).

  1. Peel cowl top panel seal off of cowl top vent panel.

 

Installation

  1. Refinish cowl top vent panel if necessary.

  1. Peel paper backing off of new cowl top panel seal and press into place on cowl top vent panel. Use a suitable roller along entire seal length to ensure good contact.

  1. Install seven screws securing cowl top panel seal to cowl top vent panel.