Section 01-02: Body Panels, Front End
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Hood Hinge

Refer to the illustration under Adjustments, Hood Alignment in this section.

Removal

  1. Open hood (16612) and suitably support it.

  1. Mark location of hood hinges (16796).

  1. NOTE: Do not allow the hood to slide, as damage to the cowl top may result.

    Remove four screws attaching hood hinge to hood.

  1. Remove screws attaching hood hinge. Remove the hood hinge from the vehicle.

 

Installation

  1. Follow removal procedures in reverse order. Adjust the hood as described in this section. Tighten the attaching screws to 17-27 Nm (13-20 lb-ft).