Section 01-02: Body Panels, Front End
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Radiator Grille

 
 

Removal

  1. Open hood (16612).

  1. Remove three screws securing radiator grille (8200) to front valance panel (17626) from the front of the vehicle.

  1. Remove four screws from the top of the radiator grille securing the radiator grille to the radiator grille opening panel reinforcement (8A284).

  1. Remove radiator grille.

 

Installation

  1. Follow removal procedures in reverse order.

  1. Tighten screws to 1-2 Nm (9-18 lb-in).



    Radiator Grille





    ItemPart NumberDescription
    1N806851-S100Nut
    28326Radiator Air Deflector
    3N805230-S55Screw
    4N623332-S100Nut
    5N807260-S55Screw
    617E940 (LH)Front Bumper Stone Deflector Filler
    717E902 (RH)Front Bumper Stone Deflector Filler
    8N801603-S55Screw
    917626Front Valance Panel
    108200Radiator Grille
    118A284Radiator Grille Opening Panel Reinforcement
    A—Tighten to 6-8 Nm
    (53-71 Lb-In)
    B—Tighten to 1-2 Nm
    (9-18 Lb-In)
    C—Tighten to 4-9 Nm
    (35-80 Lb-In)